Description
- Earth-Shattering Bass: Delivers powerful, low-frequency sound that shakes the room and impresses every listener.
- Built for Competition: Both the subwoofer and amplifier are engineered for high-performance, ensuring clear, distortion-free bass even at maximum output.
- Designed for Durability: Premium components in both the subwoofer and amplifier ensure long-lasting reliability under heavy use.
- Perfect for Custom Installations: Easy to integrate into your system with full compatibility and included accessories, including remote bass control and diagnostics tools.
Two Solo X 15″ Dual 1 Ohm 2000 Watt RMS Subwoofer Combo with Warhorse 3600 Amplifier
This Listing Includes:
- (2) Kicker 15 Inch Dual 1-Ohm Subwoofer
- (1) Kicker Warhorse 3600.1 Amplifier
Experience earth-shattering bass with our Kicker WARHORSE WXA Series 3600W Monoblock Amplifier paired with a single Kicker 15-Inch L7X Dual 1-Ohm Competition Subwoofer. This powerful combo delivers deep, resonant lows and competition-level sound performance.
If you wire each sub in series for 2 ohms and then wire the two 2-ohm loads in parallel, you’ll end up with a 1-ohm load.
Wiring Configuration:
- Each subwoofer’s coils wired in series for 2 ohms, then both wired in parallel
- Final Impedance: 1 ohm
- Amp Output: 3600W RMS @ 1 ohm
- Each subwoofer receives approximately 1800W RM
Subwoofer Specifications:
- Woofer Size: 15 in (38 cm)
- Recommended Amplifier Power: 1000-2000 Watts RMS
- Frequency Response: 20 – 100 Hz
- Magnet Diameter: 8.69 in (22 cm)
- Total Magnet Weight: 406 oz (11.5 kg)
- Voice Coil Diameter: 3″ (75 mm)
- Voice Coil Winding Width: 2.5″ (62.5 mm)
- Top Plate Thickness: 0.5″ (12 mm)
- Rated Impedance: 1 Ohm
- Xmax (Linear Excursion): 1.25″ (31.25 mm)
- Mounting Cutout: 13.75 in (34.9 cm)
- Mounting Depth: 11.56 in (29.3 cm)
Enclosure Recommendations
- Recommended Vented Box Volume: 5 cubic feet (141.6 L)
- Port Opening (in x in / cm x cm): 4.25 x 16.5 in (11 x 42 cm)
- Port Length (in / cm): 34.75 in (88 cm)
- Tuning Frequency: 30 Hz
- Woofer Displacement: 0.21 cubic feet (5.94 L)
Amplifier Specifications:
- RMS Power (watts/ch) 1 Ohm Mono (@ 14.4v, <1%THD): 3600x1
- RMS Power (watts/ch) 2 Ohm Mono (@ 14.4v, <1%THD): 2500x1
- RMS Power (watts/ch) 4 Ohm Mono (@ 14.4v, <0.5%THD): 1400x1
- Dynamic Power (watts): 5000
- Frequency Response (Hz): 10-200
- Signal-to-Noise Ratio (dB; A-weighted, re: rated power): >90
- Signal-to-Noise Ratio (dB; ref: 1W output): >70
- Input Sensitivity: low level 125mV-5V | high level 1V-40V
- Selectable Electronic Crossover: Variable Low-pass 50-200Hz, 24dB/octave
- Subsonic Filter: Defeatable @ 15Hz, 24dB/octave
Amplifier Features:
- Features extreme reliability under intense bass power and overall use
- Full-bridge Class-D design
- Quad micro-controller-regulated cooling fans
- Capable of daisy-chaining remote power across multiple amps
- Competition mode switch to avoid potentiometer creep, fix crossover setting, and gain-match multiple amps
- Includes premium remote bass-level control with a magnetic mount
- Includes a heavy-duty, magnetic-mount diagnostic tool for monitoring voltage measurements and amp protection status
- Fully compatible with most factory or aftermarket source units (with FIT+ differential inputs)
- Engineered completely in-house by KICKER R&D
Reviews
There are no reviews yet.