Description
- Massive Dual-Sub Power Two Kicker Solo X 12 Subwoofers combined with the Warhorse 3600W Amplifier deliver a powerhouse bass experience.
- Competition-Grade Performance Each subwoofer receives approximately 1800W RMS, ensuring deep, powerful, and distortion-free bass.
- Competition Mode for Ultimate Control Lock crossover settings and gain-match multiple amplifiers for a seamless setup.
- Seamless Integration Fully compatible with factory and aftermarket audio systems, featuring FIT+ differential inputs for easy installation.
Two Solo X 12″ Dual 1 Ohm 2000 Watt RMS Subwoofer Combo with Warhorse 3600 Amplifier
This Listing Includes:
- (2) Kicker 12 Inch Dual 1-Ohm Subwoofer
- (1) Kicker Warhorse 3600.1 Amplifier
Experience earth-shattering bass with our Kicker WARHORSE WXA Series 3600W Monoblock Amplifier paired with a single Kicker 12-Inch L7X Dual 1-Ohm Competition Subwoofer. This powerful combo delivers deep, resonant lows and competition-level sound performance.
If you wire each sub in series for 2 ohms and then wire the two 2-ohm loads in parallel, you’ll end up with a 1-ohm load.
Wiring Configuration:
- Each subwoofer’s coils wired in series for 2 ohms, then both wired in parallel
- Final Impedance: 1 ohm
- Amp Output: 3600W RMS @ 1 ohm
- Each subwoofer receives approximately 1800W RM
Subwoofer Specifications:
- Woofer Size: 12 in (30 cm)
- Recommended Amplifier Power: 1000-2000 Watts RMS
- Frequency Response: 20 – 100 Hz
- Magnet Diameter: 8.69 in (22 cm)
- Total Magnet Weight: 406 oz (11.5 kg)
- Voice Coil Diameter: 3″ (75 mm)
- Voice Coil Winding Width: 2.5″ (62.5 mm)
- Top Plate Thickness: 0.5″ (12 mm)
- Rated Impedance: 1 Ohm
- Xmax (Linear Excursion): 1.25″ (31.25 mm)
- Mounting Cutout: 11.06 in (28.1 cm)
- Mounting Depth: 10.125 in (25.7 cm)
Enclosure Recommendations
- Recommended Vented Box Volume: 3 cubic feet (84.9 L)
- Port Opening (in x in / cm x cm): 3.5 x 13 in (9 x 33 cm)
- Port Length (in / cm): 36.5 in (93 cm)
- Tuning Frequency: 31 Hz
- Woofer Displacement: 0.19 cubic feet (5.38 L)
Amplifier Specifications:
- RMS Power (watts/ch) 1 Ohm Mono (@ 14.4v, <1%THD): 3600x1
- RMS Power (watts/ch) 2 Ohm Mono (@ 14.4v, <1%THD): 2500x1
- RMS Power (watts/ch) 4 Ohm Mono (@ 14.4v, <0.5%THD): 1400x1
- Dynamic Power (watts): 5000
- Frequency Response (Hz): 10-200
- Signal-to-Noise Ratio (dB; A-weighted, re: rated power): >90
- Signal-to-Noise Ratio (dB; ref: 1W output): >70
- Input Sensitivity: low level 125mV-5V | high level 1V-40V
- Selectable Electronic Crossover: Variable Low-pass 50-200Hz, 24dB/octave
- Subsonic Filter: Defeatable @ 15Hz, 24dB/octave
Amplifier Features:
- Features extreme reliability under intense bass power and overall use
- Full-bridge Class-D design
- Quad micro-controller-regulated cooling fans
- Capable of daisy-chaining remote power across multiple amps
- Competition mode switch to avoid potentiometer creep, fix crossover setting, and gain-match multiple amps
- Includes premium remote bass-level control with a magnetic mount
- Includes a heavy-duty, magnetic-mount diagnostic tool for monitoring voltage measurements and amp protection status
- Fully compatible with most factory or aftermarket source units (with FIT+ differential inputs)
- Engineered completely in-house by KICKER R&D
Reviews
There are no reviews yet.