Solo X 18″ Dual 2 Ohm 2000 Watt RMS Subwoofer Combo with Warhorse 3600 Amplifier

Description

• 3600W RMS Full-Bridge Class-D Amplifier: High-efficiency design with advanced thermal management
• Massive Bass Output: L7X 18-inch subwoofers with 3″ voice coils for deep, powerful bass
• Competition-Grade Performance: Engineered for SPL competitions with robust, durable components
• Easy Integration: FIT+ differential inputs ensure compatibility with most factory and aftermarket systems

Solo X 18″ Dual 2 Ohm 2000 Watt RMS Subwoofer Combo with Warhorse 3600 Amplifier

This Listing Includes:

• (1) Kicker 18 Inch Dual 2-Ohm Subwoofer
• (1) Kicker Warhorse 3600.1 Amplifier

Experience earth-shattering bass with our Kicker WARHORSE WXA Series 3600W Monoblock Amplifier paired with a single Kicker 18-Inch L7X Dual 2-Ohm Competition Subwoofer. This powerful combo delivers deep, resonant lows and competition-level sound performance.

Wiring the dual 2-ohm coils in parallel (both positives together, both negatives together) gives you a 1-ohm load.

Wiring Configuration:

• Dual 2-Ohm coils wired in parallel for a 1-ohm load
• Amp Output: 3600W RMS @ 1 ohm
• Careful gain setting recommended to avoid overpowering the subwoofer

Subwoofer Specifications:

• Woofer Size: 18 in (46 cm)
• Recommended Amplifier Power: 1000-2000 Watts RMS
• Frequency Response: 18 – 100 Hz
• Magnet Diameter: 8.6875″ (22 cm)
• Total Magnet Weight: 406 oz (11.5 kg)
• Voice Coil Diameter: 3″ (75 mm)
• Voice Coil Winding Width: 2.5″ (62.5 mm)
• Top Plate Thickness: 0.5″ (12 mm)
• Rated Impedance: 2 Ohm
• Xmax (Linear Excursion): 1.25″ (31.25 mm)
• Mounting Cutout: 16.5″ (42 cm)
• Mounting Depth: 13.1875″ (33.5 cm)

Enclosure Recommendations

• Recommended Vented Box Volume:7.5 cubic feet (214.5 L)
• Port Opening (in x in / cm x cm):6.5 x 19.5 in (16.5 x 49.5 cm)
• Port Length (in / cm):27.75 in (70.5 cm)
• Tuning Frequency:28 Hz
• Woofer Displacement:0.36 cubic feet (10.19 L)

Amplifier Specifications:

• RMS Power (watts/ch) 1 Ohm Mono (@ 14.4v, <1%THD): 3600x1
• RMS Power (watts/ch) 2 Ohm Mono (@ 14.4v, <1%THD): 2500x1
• RMS Power (watts/ch) 4 Ohm Mono (@ 14.4v, <0.5%THD): 1400x1
• Dynamic Power (watts): 5000
• Frequency Response (Hz): 10-200
• Signal-to-Noise Ratio (dB; A-weighted, re: rated power): >90
• Signal-to-Noise Ratio (dB; ref: 1W output): >70
• Input Sensitivity: low level 125mV-5V | high level 1V-40V
• Selectable Electronic Crossover: Variable Low-pass 50-200Hz, 24dB/octave
• Subsonic Filter: Defeatable @ 15Hz, 24dB/octave

Amplifier Features:

• Features extreme reliability under intense bass power and overall use
• Full-bridge Class-D design
• Quad micro-controller-regulated cooling fans
• Capable of daisy-chaining remote power across multiple amps
• Competition mode switch to avoid potentiometer creep, fix crossover setting, and gain-match multiple amps
• Includes premium remote bass-level control with a magnetic mount
• Includes a heavy-duty, magnetic-mount diagnostic tool for monitoring voltage measurements and amp protection status
• Fully compatible with most factory or aftermarket source units (with FIT+ differential inputs)
• Engineered completely in-house by KICKER R&D