Solo X 12″ Dual 1 Ohm 2000 Watt RMS Subwoofer Combo with Warhorse 3600 Amplifier

Description

• Massive Power & Precision Kicker Solo X 12 Subwoofer paired with the Warhorse 3600W Amplifier delivers an explosive bass experience.
• Competition-Grade Performance Engineered for deep, hard-hitting bass with a 3 voice coil and a massive 406 oz magnet.
• Tuned for Ultimate Bass Designed for a 3-cubic-foot vented enclosure, precision-tuned at 31Hz for low-frequency dominance.
• Advanced Amplifier Design Full-bridge Class-D technology with quad cooling fans for peak efficiency and extreme reliability.

Solo X 12″ Dual 1 Ohm 2000 Watt RMS Subwoofer Combo with Warhorse 3600 Amplifier

This Listing Includes:

• (1) Kicker 12 Inch Dual 1-Ohm Subwoofer
• (1) Kicker Warhorse 3600.1 Amplifier

Experience earth-shattering bass with our Kicker WARHORSE WXA Series 3600W Monoblock Amplifier paired with a single Kicker 12-Inch L7X Dual 1-Ohm Competition Subwoofer. This powerful combo delivers deep, resonant lows and competition-level sound performance.

Wiring the dual 1-ohm coils in series (connect one coil’s positive to the other’s negative) gives you a 2-ohm load.

Wiring Configuration:

• Dual 1-Ohm coils wired in series for a 2-ohm load
• Amp Output: 2500W RMS @ 2 ohms
• Perfect match for the subwoofers 10002000W RMS power rating

Subwoofer Specifications:

• Woofer Size: 12 in (30 cm)
• Recommended Amplifier Power: 1000-2000 Watts RMS
• Frequency Response: 20 – 100 Hz
• Magnet Diameter: 8.69 in (22 cm)
• Total Magnet Weight: 406 oz (11.5 kg)
• Voice Coil Diameter: 3″ (75 mm)
• Voice Coil Winding Width: 2.5″ (62.5 mm)
• Top Plate Thickness: 0.5″ (12 mm)
• Rated Impedance: 1 Ohm
• Xmax (Linear Excursion): 1.25″ (31.25 mm)
• Mounting Cutout: 11.06 in (28.1 cm)
• Mounting Depth: 10.125 in (25.7 cm)

Enclosure Recommendations

• Recommended Vented Box Volume: 3 cubic feet (84.9 L)
• Port Opening (in x in / cm x cm): 3.5 x 13 in (9 x 33 cm)
• Port Length (in / cm): 36.5 in (93 cm)
• Tuning Frequency: 31 Hz
• Woofer Displacement: 0.19 cubic feet (5.38 L)

Amplifier Specifications:

• RMS Power (watts/ch) 1 Ohm Mono (@ 14.4v, <1%THD): 3600x1
• RMS Power (watts/ch) 2 Ohm Mono (@ 14.4v, <1%THD): 2500x1
• RMS Power (watts/ch) 4 Ohm Mono (@ 14.4v, <0.5%THD): 1400x1
• Dynamic Power (watts): 5000
• Frequency Response (Hz): 10-200
• Signal-to-Noise Ratio (dB; A-weighted, re: rated power): >90
• Signal-to-Noise Ratio (dB; ref: 1W output): >70
• Input Sensitivity: low level 125mV-5V | high level 1V-40V
• Selectable Electronic Crossover: Variable Low-pass 50-200Hz, 24dB/octave
• Subsonic Filter: Defeatable @ 15Hz, 24dB/octave

Amplifier Features:

• Features extreme reliability under intense bass power and overall use
• Full-bridge Class-D design
• Quad micro-controller-regulated cooling fans
• Capable of daisy-chaining remote power across multiple amps
• Competition mode switch to avoid potentiometer creep, fix crossover setting, and gain-match multiple amps
• Includes premium remote bass-level control with a magnetic mount
• Includes a heavy-duty, magnetic-mount diagnostic tool for monitoring voltage measurements and amp protection status
• Fully compatible with most factory or aftermarket source units (with FIT+ differential inputs)
• Engineered completely in-house by KICKER R&D