Description
Massive Car Audio 2x 12″ Subwoofer 2800W DVC 2 Ohm & 4000W Monoblock Amplifier
Massive Audio’s GTX subs use tight Red stitching that’s sewn through a UV-treated non-pressed paper cone onto an EROM foam surround. Then it’s bonded to a heavy gauge steel basket that’s bolted to double stacked high flux Y30 70-150oz Strontium ferrite magnets with a 10mm top plate. Then everything dances on a springy poly cotton spider with high powered woven tinsel leads that connect to spring-loaded 5-way binding nickel-plated speaker connectors. These woofers scream sound quality and truly represent Massive Audio’s commitment to value and performance.
NANO EDGE Series Amplifiers use the famous Nano Block Military spec circuit board and “N” drive MOSFET power supplies to insure performance but they now have several new cutting-edge features like RCA inputs that can take RCA or Speaker levels at up to 10 Volts in!
This listing includes:
(2) Massive Audio 12″ Subwoofer GTX122
(1) Massive Audio Monoblock Amplifier E4
Features for GTX122 Subwoofer:
– Heavy-gauge Steel Basket with Industrial Texture Painting
– Dual-Stacked High Flux Y30 120oz Strontium Ferrite Magnets
– Dual Impedance / 2.5″ 4 Layer Hi-Temp Voice Coil
– Poly-Cotton Spider with Woven Round Tinsel Leads
– UV Treated / Non-Pressed Paper Cone with EROM Foam Surround
– Round Shape PP Vacuum Dust Cap
– 10mm Top Plate
– Customized Rubber Gasket & Magnet Boot
SPECIFICATIONS PER SUBWOOFER:
Size: 12″
Watts RMS: 700
Peak Power: 1400
Cone: UV Treated / Non-Pressed Paper
Voice Coil: 2.5″ Dual 2 Ohm
Surround: EROM Foam
Magnet: 120oz
Terminals: 5 Way Binding Push Terminals
Basket: Heavy Gauge Steel
Tinsel Leads: Woven Round
X-Max: 15mm + 10mm top plate
SPL: 88.6 dB
FS: 41Hz
DIMENSIONS FOR SUBWOOFER:
Ported Box: 14″H x 16″D x 16″W / 14.05 sq. in. Port Area
Sealed Box: 1.62 ft3
Mounting Depth: 6.69″
Mounting Width: 10.79″
Overall Diameter: 12.28″
Features for E4 Amplifier:
– Built-In OEM Line Converter
– High Power in Extremely Small Heat Sink
– Mil-Spec Double Sided PCB with SMD Parts
– Built-in Noise Reduction Circuitry
– Full Mosfet with High-Grade Switching Devices
– Regulated Power Supply & Dual Output Voltage
– CTA-2006 Compliant
– Built-in Auto Sensing Turn-on via Hi-Input
– 12v Remote Output for External Devices
– 0~12dB Variable Bass Boost
– Next-Gen Advanced 5 Way Protection
AMPLIFIER SPECIFICATIONS:
RMS Power: 2000w x 1
PEAK Power: 4000w x 1
RMS @ 2 Ohms: 1000w x 1
Bridged RMS: n/a
Min Impedance: 1 Ohm
Min Ohm Bridged: n/a
THD: Less Than 0.3% @ 4 Ohm
S/N: More Than 80 dB
Max Voltage: 15v
Max RCA Voltage: 10v
Freq. Response: 10Hz – 220Hz
Dimensions: 14.3 (in) x 5.9 (in) x 2.1 (in)
Reviews
There are no reviews yet.