Kicker 12″ 4 Ohm 800W Peak CompVR Pro Car Audio Subwoofer Black 43CVR124

Description

• The CompVR 12-Inch Subwoofer is a 4 dual voice coil design, making it easy to get the most out of your amp.
• With Santoprene surround that gives the cone added strength under stress, the Spiralead perimeter venting, and spring-loaded push terminals the Kicker 12″ CompVR Subwoofer provides high-quality and high-performance.
• CompVR creates your bass using high-temp, dual voice coils.
• The CompVR 12-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power. See below for more details.
• MEASUREMENTS – Overall Diameter: 12 | Mounting Depth: 6.25″ | Mounting Diameter: 11

Kicker 12″ 4 Ohm 800W Peak CompVR Pro Car Audio Subwoofer Black 43CVR124

This Listing Includes:

• (1) Kicker 12″ 4 Ohm 800W Peak CompVR Pro Car Audio Subwoofer Black 43CVR124

Description: Experience deep, powerful bass with the Kicker 12″ 4 Ohm 800W Peak CompVR Pro Subwoofer. Designed for serious car audio enthusiasts, this sub delivers clear, punchy low frequencies with Kickers signature durable build quality and advanced technology. The CompVR Pro series is engineered to handle high power while maintaining excellent sound fidelity, making it a perfect upgrade for your cars sound system.

Whether you’re aiming for crisp bass impact or smooth low-end response, the 12″ CompVR Pro provides versatility and reliability in one sleek black package.

Why Choose the Kicker 43CVR124?

• Proven reliability in demanding car audio environments
• Crisp, tight bass that enhances any music genre
• High power handling with minimal distortion
• Easy installation with push terminals and common mounting dimensions
• Stylish black design fits most vehicle interiors seamlessly

Recommended Amplifier Match:

• Ideal RMS amplifier power: 300-450 Watts at 4 Ohms
• Compatible with popular mono and 4-channel amps supporting 4 Ohm subs

Perfect For:

• Upgrading factory or basic audio systems
• Bassheads looking for reliable, punchy low-end sound
• Custom car audio builds requiring a dependable, high-output 12″ subwoofer

Key Features:

• 12-inch woofer diameter delivers strong, tight bass for a powerful sound experience
• 4 Ohm impedance compatible with most amplifiers, providing stable power handling
• 800 Watts peak power handling for clean, high-output bass
• RMS Power Handling: Typically around 400 Watts (check manual for exact specs)
• CompVR Pro technology for improved cone control and reduced distortion
• Black polypropylene cone with UV-resistant finish for durability and longevity
• High roll surround design enhances cone excursion and durability
• Heavy-duty stamped steel basket for structural integrity
• Vented pole piece improves heat dissipation and power handling
• Injection-molded spider for long-lasting reliability and precise suspension
• Easy push terminals for quick, secure wiring connections

Specifications:

• Subwoofer Size12 inches
• Impedance4 Ohms
• Peak Power Handling: 800 Watts
• RMS Power Handling: 400 Watts (approx.)
• Frequency Response: 25 Hz-250 Hz (typical)
• Sensitivity: 86 dB
• Mounting Depth: 5.5 inches (varies)
• Cutout Diameter: 11.1 inches
• Voice Coil Diameter: 2 inches
• Cone Material: Polypropylene
• Surround Material: Santoprene (high roll)
• Basket Type: Stamped Steel
• Color: Black

Thiele-Small Parameters:

• Re | 7.13 – Ohm electrical voice coil resistance at DC
• Krm | 0.01065 – Ohm WRIGHT inductance mode
• Erm | 0.87 – WRIGHT inductance mode
• Kxm | 0.05685 – Ohm WRIGHT inductance modeExm | 0.75 – WRIGHT inductance mode
• Cmes | 474.11 – F electrical capacitance representing moving mass
• Lces | 49.66 – mH electrical inductance representing driver compliance
• Res | 108.625 Ohm resistance due to mechanical losses
• fs | 32.85 – Hz driver resonance frequency
• Mms | 163.3285g mechanical mass of driver diaphragm assembly including air load and voice coilMmd (Sd) | 149.504g mechanical mass of voice coil and diaphragm without air load
• Rms | 3.174 kg/s mechanical resistance of total-driver losses
• Cms | 0.1445 mm/N mechanical compliance of driver suspension
• Kms | 6.95 N/mm mechanical stiffness of driver suspension
• Bl | 18.5685 Tm force factor (Bl product)
• Lambda | 0.0185 suspension creep factor
• Qtp | 0.7465 total Q-factor considering all losses
• Qms | 10.61 mechanical Q-factor of driver in free air considering Rms only
• Qes | 0.6965 electrical Q-factor of driver in free air considering Re only
• Qts | 0.6535 total Q-factor considering Re and Rms only
• Vas | 57.52965 I equivalent air volume of suspension
• n0 | 0.28%reference efficiency (2 pi-radiation using Re)
• Lm | 86.675 dB characteristic sound pressure level (SPL at 1m for 1W @ Re)
• Lnom | 87.17 dB nominal sensitivity (SPL at 1m for 1W @ Zn)
• rmse Z | 2.7%root-mean-square fitting error of driver impedance Z(f)
• rmse Hx | 1.885%root-mean-square fitting error of transfer function Hx (f)
• Sd | 530.93cmdiaphragm area
• Xmax | 14 mmXmax (Linear Excursion)

Product Dimensions:

• Overall Diameter: 12.6″
• Mounting Depth: 5.5″
• Cutout Diameter: 11.1″

Package Dimensions:

• Length: 14″
• Width: 14″
• Height: 8″