DS18 2″ 8 Ohm 680 W Neodymium Phenolic Compression Driver and Aluminum Horn Kit

Description

DS18 2″ 8 Ohm 680 W Neodymium Phenolic Compression Driver and Aluminum Horn Kit

The DKN1XSPH includes the PRO-DRN1XPH neodymium driver plus the PRO-HA52/BK short aluminum horn so you only need 5.2 inches of mounting depth to mount these ear ripping drivers. The new throat is 2″ in diameter with brilliantly brushed DS18 logos and is made for maximum directional efficiency and the included spacer amplifies the DB sensitivity. With an AES power handling of 170w and peak at 680w you will be sure to draw everyone’s attention to your audio!

This Listing Includes:

(1) Neodymium Phenolic Compression Driver and Aluminum Horn Kit

(1) Bass Blocker

Features:

-DS18 Driver spacer increases the sensitivity decibel level significantly for the loudest response.

-Aluminum “Shorty” throat with brushed DS18 logos for an amazing look and great fitment.

-DRN1XPH Driver with an AES rating of 170 watts and peak of 680w for super loud and vibrant highs with a Neodymium 8 ohm voice coil.

-5.2 inch mounting depth and 5.5 inches total mounting depth so you don’t need a large amount of mounting depth.

Specifications:

Throat Diameter: 2″/50.8mm

Installation Type: Bolt-on

Nominal Impedance: 8 OHMS

Peak Power Handling: 680W

Program Power Handling:`340W

AES Power Handling:170W

Sensitivity (1w/1m):117 dB

Frequency Response:630Hz-16KHz

Recommended HI Pass Crossover:900 Hz

Motor Specifications:

Voice Coil Diameter:2.03″/51mm

Voice Coil Former Material: Kapton

Winding Material: CCA

Diaphragm Material: Phenolic

Magnet Material: Neodymium

Magnet size: 5.27″ x 0.15″/133.8 x 3.81mm

Dimensions:

Overall Diameter :7″/180 mm

Overall Depth: 5″/141.8 mm

Bolt Size: 0.21″/5.5mm

Mounting Depth: 5.22″/132.8mm

Mounting Hole Diameter: 6.3″/161mm

Motor Diameter: 5.27″/134 mm