Description
- Complete Bass Combo Includes (2) Audiopipe 15 SVC 4-Ohm Subwoofer (500W RMS) + (1) APHF-1500D-H1 Class D Monoblock Amplifier for a matched, ready-to-power bass system.
- Hard-Hitting 15″ Subwoofer Delivers powerful low-end with a high-temp 2.5″ voice coil, treated cloth surround, and vented motor for reliable daily performance.
- Efficient 1500W Monoblock Amp Compact Class D amplifier delivers clean output and full-range frequency response while staying cool under pressure.
- Trusted Audiopipe Quality Built tough for consistent performance with pro-level engineering and clean, efficient power delivery.
15″ 1000 Watt RMS Pro Car Audio Subwoofer Combo w/APHF 1500 Watt Mono Amplifier
This Listing Includes:
- (2) Audiopipe TS-CAR15 15″ 500W RMS SVC 2-Ohm Subwoofers
- (1) Audiopipe APHF-1500D-H1 Full-Range Class D Monoblock Amplifier (1500W Max, 1000W RMS @ 2 Ohm)
Product Description:
Crank up your low-end with this powerful Audiopipe combo featuring two 15″ SVC 2-ohm subwoofers paired with a 1000W RMS monoblock amplifier. Whether you’re building your first system or adding more bass to your current setup, this combo is engineered for clean, deep, and chest-thumping performance.
Combo Highlights:
- Perfect match for budget builds and single-sub setups
- Trusted Audiopipe performance
- Easy to install and tune
- Delivers clean bass and headroom for daily listening
Wiring Configuration:
- Wire both SVC 2-ohm subwoofers in parallel to achieve a final 1-ohm load, ideal for extracting maximum power from the APHF-1500D-H1 amplifier.
- This configuration allows the amp to deliver close to its full-rated 1000W RMS, powering each subwoofer with ~500W RMS.
- Use high-quality 10 AWG or thicker speaker wire and a 4 AWG amp kit for optimal results.
Subwoofer Features:
- Power Handling: 500 Watts RMS / 1000 Watts Max
- 4 Ohm Single Voice Coil
- 2.5″ High-Temperature Voice Coil
- Stamped Steel Basket
- Treated Cloth Surround
- Vented Pole Piece for Cooling
- Mounting Depth: 7.4″
- Frequency Response: 30Hz-1.5kHz
Specifications:
- 1000 Watts Power (P.M.P.O.)
- 500 Watts Power (R.M.S)
- Frequency Response: 20-1000Hz
- Sensitivity: 91dB
- 2.5″ 4-Layer Single Voice Coil BASV
- Powdered Black Paint Steel Basket
- Patent Pipe Multi-Connect Terminal
- Impedance: 4-Ohms
- 73 Oz. Magnet
Measurements:
- Length: 17″
- Width: 17″
- Height: 10″
- Weight: 17.4 lbs
- Overall Diameter: 15 3/8″
- Mounting Diameter: 14 3/8″
- Mounting Depth: 7 1/16″
Enclosure Recommendations:
- Ported (Vented)
- Ported boxes offer louder and deeper bass response, which pairs well with the 500W RMS sub and full-range amp combo.
- Internal Volume: 3.0 -3.5 cu. ft. (net)
- Tuning Frequency: 34Hz-38Hz
- Port Area: 4050 sq. in. (slot port recommended)
- Material: 3/4″ MDF minimum
- Mounting Depth Required: 7.5″ minimum
Pre-Fab Options Available at Big Jeff Audio:
- Single 15″ Ported Subwoofer Box (3.25 cu. ft. tuned to 36Hz)
- Custom 15″ Enclosures: Available with tuning options and heavy-duty terminals.
Sealed enclosures are possible for tighter bass response but will reduce output. Go sealed only if space is limited or you want a more accurate (less boomy) sound.
Amplifier Features:
- Full-Range Class D Monoblock
- Max Power: 1500 Watts
- Stable at 2 Ohms
- Variable Low Pass Filter (50Hz-250Hz)
- Variable Subsonic Filter (10Hz-50Hz)
- Bass Boost Control
- RCA Line Level Inputs
- Compact and Efficient Design
- Dimensions: 8.5″X7″X2.3″
Specifications:
- FREQUENCY RESPONSE: 10Hz-20KHz
- RMS @ 4-Ohm (<1% DISTORTION): 500W (14.4V)
- RMS @ 2-Ohm (<1% DISTORTION): 1000W (14.4V)
- RMS @ 1-Ohm (<1% DISTORTION): 1500W (14.4V)
- SIGNAL TO NOISE RATIO: >85dB
- INPUT SENSITIVITY: 0.25 -4V
- HIGH PASS: 10Hz-80Hz 12dB/Octave
- LOW PASS: 80Hz-20KHz 12dB/Octave
- BASS BOOST: 0-12 dB @ 35Hz-90Hz
- OVER-VOLTAGE PROTECTION: 16V
- UNDER-VOLTAGE PROTECTION: 9V
- FUSE TYPE: 100A ANL Fuse
- Power/Ground Terminal Inputs: 0 Ga
- Speaker Terminal Inputs: 4 Ga
Dimensions:
- Length: 5.9″ (150mm)
- Width: 9.0″ (229mm)
- Height: 2.9″ (73mm)
Reviews
There are no reviews yet.