Audiopipe Pro 12″ 300W 4-Ohm Subwoofer Pair + 800W Class D Full-Range Amp Combo

Description

• POWERFUL BASS RESPONSE 12″ subwoofer delivers 300W RMS and hits deep with a 29Hz1500Hz frequency range
• PERFECT MATCH 800W Class D amp at 2 Ohms is tuned to drive the subwoofer to peak performance without distortion
• COMPACT DESIGN Mini amplifier fits easily into tight spaces while delivering serious power and sound customization
• BUILT FOR DURABILITY Subwoofer features a heavy-duty steel frame and 68 oz magnet for clean, distortion-free output
• CUSTOM TUNING OPTIONS Amp includes subsonic filter, bass boost, and adjustable crossovers for tailored sound

Audiopipe Pro 12″ 300W 4-Ohm Subwoofer Pair + 800W Class D Full-Range Amp Combo

This listing includes:

• (2) Audiopipe Pro Car Audio 12″ 300 Watt RMS 4-Ohm 29Hz-1500Hz Subwoofer TS-PP2-12
• (1) Audiopipe APMOX-800.1 800W Monoblock Class D Mini Amplifier

Description:

Unleash clean, powerful bass in a compact setup with this matched Audiopipe combo featuring a 12″ subwoofer and Class D amplifier. The Audiopipe TS-PP2-12 subwoofer delivers 300 Watts RMS and is engineered for rich low-end response with a frequency range of 29Hz1500Hz. With a 2.5″ 4-layer high-temp Kapton voice coil, heavy-duty steel frame, and a 68 oz magnet, it provides consistent, distortion-free performance that can handle the demands of any serious car audio build.

Perfectly paired with the APMOX-800.1 Monoblock Amplifier, this setup is optimized for both efficiency and power. The amp pushes 800W RMS at 2 Ohmsideal for driving the subwoofer to its full potential. Featuring full-range Class D circuitry, MOSFET power management, subsonic filtering, bass boost, and thermal protection, it ensures reliable, tuned performance in any environment. Whether you’re upgrading your daily ride or building out a compact sound system for off-road or recreational use, this duo delivers premium results with precision and power.

Wiring Method: Connect both positives together, both negatives together.

Subwoofer TS-PP2-12 Key Features:

• Peak Power Handling: 1000 Watts (P.M.P.O.)
• Continuous Power: 300 Watts RMS
• 2.5″ 4-Layer High-Temperature Kapton Voice Coil
• Heavy-Duty Steel Frame for increased stability and reduced distortion
• Durable Polypropylene Cone with Rubber Surround
• 68 Oz Magnet for enhanced power and bass accuracy
• Mounting Depth: 5-5/8″ (142mm)
• Impedance: 4 Ohms

Subwoofer TS-PP2-12 Specifications:

• Diameter: 12″ (305mm)
• Sensitivity (2.83V@1m) : 86dB
• Power Handling: 300 Watts RMS
• Frequency Response: 29-1500Hz
• Nominal Impedance: 4 Ohms
• Voice Coil Diameter: 2″ (51mm)

Subwoofer TS-PP2-12 Thiele-Small Parameters:

• Voice Coil DC Resistance – Revc (Ohms): 3.6
• Voice Coil Inductance @1kHz: Levc(mH) ” 2.0
• Driver Radiating Area Sd(in): 530
• Motor Force Factor Bl(Tm): 16
• Compliance Volume Vas(ft): 1.5
• Free-air Resonance: Fs(Hz) 32
• Maximum Excursion Xmax(in) 0.48

Subwoofer TS-PP2-12 Product Dimensions:

• Length: 12″
• Height: 6.5″
• Width: 12″
• Weight: 8.55 lb.

Amplifier APMOX-800.1 Features:

• Full-Range Class D Amplifier
• Compact, Space-Saving Design
• Advanced MOSFET Circuitry
• Variable Bass Boost (0-12dB)
• Built-in Subsonic Filter (50Hz)
• Adjustable High-Pass and Low-Pass Filters (50Hz – 500Hz)
• Remote Subwoofer Volume Control with LED Indicators
• Overload and Overheat Protection
• High and Low-Level Inputs

Amplifier APMOX-800.1 Specifications:

• RMS Power @ 4 Ohms: 1 x 560W
• RMS Power @ 2 Ohms: 1 x 800W
• Frequency Response: 10Hz – 500kHz
• Signal-to-Noise Ratio: 87dB
• THD: 0.08%
• Working Voltage: 9V – 16V

Amplifier APMOX-800.1 Dimensions:

• Length: 4.6″ (117mm)
• Width: 5.7″ (144mm)
• Height: 2.5″ (64mm)