Audiopipe Pro 12″ 300W 4-Ohm Subwoofer + 1000W Monoblock Class D Amp Combo

Description

• HIGH-OUTPUT SUBWOOFER Delivers 300W RMS and deep bass from 29Hz1500Hz for tight, powerful low-end sound.
• MATCHED MONOBLOCK AMPLIFIER Pairs perfectly with the subwoofer, delivering up to 1024W RMS at 1 ohm for max output.
• ADVANCED VOICE COIL 2.5″ 4-layer Kapton coil ensures heat resistance and reliable performance at high power levels.
• CLASS D EFFICIENCY Compact APMQ-1300 amp uses MOSFET circuitry for clean, efficient power with minimal distortion.
• FULL BASS CONTROL Includes remote bass knob and variable filters for customizable, in-car audio tuning on the fly.

Audiopipe Pro 12″ 300W 4-Ohm Subwoofer + 1000W Monoblock Class D Amp Combo

This listing includes:

• (1) Audiopipe Pro Car Audio 12″ 300 Watt RMS 4-Ohm 29Hz-1500Hz Subwoofer TS-PP2-12
• (1) Monoblock Class D Mini Amplifier Audiopipe Series APMQ-1300

Description:

This subwoofer and amplifier combo has been carefully matched to deliver optimal performance, efficiency, and clarity for your car audio system. The Audiopipe TS-PP2-12 12″ 300 Watt RMS 4-Ohm Subwoofer is engineered for deep, responsive bass with a broad frequency response of 29Hz1500Hz and a high-strength 68 oz magnet. Its 2.5″ 4-layer Kapton voice coil and durable steel frame ensure long-term durability and performance under pressure.

To power this subwoofer efficiently and effectively, weve paired it with the Audiopipe APMQ-1300 1000 Watt Monoblock Class D Amplifier, which delivers 1024 watts RMS at 1 ohmperfect for extracting maximum output from the 4-ohm sub when wired correctly in a safe configuration. This Class D amp uses advanced MOSFET circuitry for clean, high-power output with low distortion, while a variable low-pass filter and remote bass knob give you total control over your sound.

Wiring method: VC (+) to Amp (+), VC () to Amp ()

Subwoofer TS-PP2-12 Key Features:

• Peak Power Handling: 1000 Watts (P.M.P.O.)
• Continuous Power: 300 Watts RMS
• 2.5″ 4-Layer High-Temperature Kapton Voice Coil
• Heavy-Duty Steel Frame for increased stability and reduced distortion
• Durable Polypropylene Cone with Rubber Surround
• 68 Oz Magnet for enhanced power and bass accuracy
• Mounting Depth: 5-5/8″ (142mm)
• Impedance: 4 Ohms

Subwoofer TS-PP2-12 Specifications:

• Diameter: 12″ (305mm)
• Sensitivity (2.83V@1m) : 86dB
• Power Handling: 300 Watts RMS
• Frequency Response: 29-1500Hz
• Nominal Impedance: 4 Ohms
• Voice Coil Diameter: 2″ (51mm)

Subwoofer TS-PP2-12 Thiele-Small Parameters:

• Voice Coil DC Resistance – Revc (Ohms): 3.6
• Voice Coil Inductance @1kHz: Levc(mH) ” 2.0
• Driver Radiating Area Sd(in): 530
• Motor Force Factor Bl(Tm): 16
• Compliance Volume Vas(ft): 1.5
• Free-air Resonance: Fs(Hz) 32
• Maximum Excursion Xmax(in) 0.48

Subwoofer TS-PP2-12 Dimensions:

• Length: 12″
• Height: 6.5″
• Width: 12″
• Weight: 8.55 lb.

Amplifier APMQ-1300 Features:

• CLASS D MONO AMPLIFIER: Class D design delivers efficient power without sacrificing sound quality.
• COMPACT DESIGN: Slim build allows easy installation in most vehicle interiors.
• ADVANCED MOSFET CIRCUITRY: Uses MOSFETs for strong, low-distortion performance.
• VARIABLE SUBSONIC FILTER: Built-in filter removes low-end noise from 550Hz.
• VARIABLE LOW-PASS FILTER: Adjusts low-frequency output for optimal sound.
• LED INDICATOR: LED lights show amp status for easy monitoring and safety.
• RELIABLE PROTECTION: Built-in safeguards protect against heat, shorts, and low voltage.
• REMOTE BASS CONTROL: Includes bass knob for quick level adjustment from the dash.

Amplifier APMQ-1300 Specifications:

• PEAK POWER: 1000 WATTS
• RMS @ 4 Ohm (<1% Distortion): 376W
• RMS @ 2 Ohm (<1% Distortion): 648W
• RMS @ 1 Ohm (<1% Distortion): 1024W
• FREQUENCY RESPONSE: 18-180Hz
• SIGNAL TO NOISE RATIO: >70dB
• INPUT SENSITIVITY: 0.2-5V

Amplifier APMQ-1300 Dimensions (in inches):

• Length: 10.5″
• Width: 2.1″
• Height: 6.2″