Description
- Purchasing this amp and install kit bundle at no additional cost gives you an additional year warranty on your amplifier!
- A powerful 24dB crossover is also included, letting you quickly tune your system to perfection.
- Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections.
- KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are “Real Marine.”
- Measurements: Length: 14.75″ | Width: 8.3125″ | Height: 2.125″
Kicker Full Range 8 Channel Marine Amplifier Class D 1200W Peak 2 Ohm 48KXMA8008
This Listing Includes:
- (1) Kicker Full Range 4 Channel Marine Amplifier Class D 700W Peak 2 Ohm 48KXMA5004
- (1) Kicker Complete 4 AWG OFC Marine Amp Power Installation Kit 47KMPK4
Purchasing this amp and install kit bundle at no additional cost gives you an additional year warranty on your amplifier!
The KXMA 800-watt, eight-channel amplifier is one of the most flexible marine power pieces available today.
The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are “Real Marine.”
Gain, crossover and bass-boost controls are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. KickEQ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection.
Features:
- Class D Amplifier
- Gain Control With “Gain Match” LED Indicator
- FIT2 (Fail-safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ 6dB Variable Bass Boost
- ABYC/NMMA-Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted, Teal LED Light Pipe
- Stainless-Steel Mounting Hardware Included
This KXMA amplifier delivers as much as 100 watts into eight full-range channels, or 200 watts into four sets of bridged channels. See below for more details.
Specifications:
- POWER [watts/ch], 2 OHM STEREO: 100 x 8
- POWER [watts/ch], 4 OHM STEREO: 50 x 8
- POWER [watts/ch], 4 OHM BRIDGED MONO: 200 x 4
- DYNAMIC POWER [watts]: 1200
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
ACTIVE CROSSOVER:
- (amp 1 and amp 2) 24dB/octave, Off/ HP/LP, variable 10-5kHz w/ 10x switch
- (amp 3 and amp 4) 24dB/octave, Off/ HP/LP/BP, variable HP 10500Hz; variable LP, 405kHz w/ 10x switch
- KickEQ BOOST: Variable 0-6dB, centered @ 40Hz (amps 1, 2, 3 and 4)
- COMES WITH WIRED REMOTE: No
Measurements:
- Length: 14.75″
- Width: 8.3125″
- Height: 2.125″
Package Dimensions:
- Length: 21″
- Width: 11.5″
- Height: 4.5″
- Package weight: 8.5 lbs
Reviews
There are no reviews yet.