Massive Car Audio 2x 12″ Subwoofer 2800W DVC 4 Ohm & 2800W Monoblock Amplifier

Description

• GTX124: Watts RMS: 700W
• GTX124: Peak Power: 1400W
• E3 Amplifier: PEAK Power: 2800w x 1
• E3 Amplifier: Min Impedance: 1 Ohm

Massive Car Audio 2x 12″ Subwoofer 2800W DVC 4 Ohm & 2800W Monoblock Amplifier

Massive Audio’s GTX subs use tight red stitching that’s sewn through a UV-treated non-pressed paper cone onto an EROM foam surround. Then it’s bonded to a heavy gauge steel basket that’s bolted to double stacked high flux Y30 70-150oz Strontium ferrite magnets with a 10mm top plate. Then everything dances on a springy poly cotton spider with high powered woven tinsel leads that connect to spring-loaded 5-way binding nickel-plated speaker connectors. These woofers scream sound quality and truly represent Massive Audio’s commitment to value and performance.

NANO EDGE Series Amplifiers use a famous Nano Block Military speck circuit board and “N” drive MOSFET power supplies to insure performance but they now have several new cutting-edge features like RCA inputs that can take RCA or Speaker levels at up to 10 Volts in! This built-in money-saving OEM line converter is found in every “EDGE” model, and every E3 model uses a DC off-set music sensing system to activate the ATO (Auto Turn On).

This listing includes:

(2) Massive Audio 12″ Subwoofer GTX124

(1) Massive Audio Monoblock Amplifier E3

Features for GTX124 Subwoofer:

– Heavy gauge Steel Basket with Industrial Texture Painting

– Dual Stacked High Flux Y30 120oz Strontium Ferrite Magnets

– Dual Impedance / 2.5″ 4 Layer Hi-Temp Voice Coil

– Poly Cotton Spider with Woven Round Tinsel Leads

– UV Treated / Non-Pressed Paper Cone with EROM Foam Surround

– Round Shape PP Vacuum Dust Cap

– 10mm Top Plate

– Customized Rubber Gasket & Magnet Boot

SPECIFICATIONS PER SUBWOOFER:

Size: 12″

Watts RMS: 700W

Peak Power: 1400W

Cone: UV Treated / Non-Pressed Paper

Voice Coil: 2.5″ Dual 4 Ohm

Surround: EROM Foam

Magnet: 120oz

Terminals: 5 Way Binding Push Terminals

Basket: Heavy Gauge Steel

Tinsel Leads: Woven Round

X-Max: 15mm + 10mm top plate

SPL: 87.9 dB

FS: 40.2Hz

Ported Box: 14″H x 16″D x 16″W / 14.05 sq. in. Port Area

Sealed Box: 1.62 ft3

Features for E3 Amplifier:

– Built-In OEM Line Converter

– High Power in Extremely Small Heat Sink

– Mil-Spec Double Sided PCB with SMD Parts

– Built-in Noise Reduction Circuitry

– Full MOSFET with High-Grade Switching Devices

– Regulated Power Supply & Dual Output Voltage

– CTA-2006 Compliant

– Built-in Auto Sensing Turn-on via Hi-Input

– 12v Remote Output for External Devices

– 0~12dB Variable Bass Boost

– Next-Gen Advanced 5 Way Protection

AMPLIFIER SPECIFICATIONS:

RMS Power: 1400w x 1

PEAK Power: 2800w x 1

RMS @ 2 Ohms: 700w x 1

Bridged RMS: n/a

Min Impedance: 1 Ohm

Min Ohm Bridged: n/a

THD: Less Than 0.3% @ 4 Ohm

S/N: More Than 80 dB

Max Voltage: 15v

Max RCA Voltage: 10v

Freq. Response: 10Hz – 220Hz

Dimensions: 11.1 (in) x 5.9 (in) x 2.1 (in)