DS18 Jeep JK/JKU Loaded Sound Bar Combo w/ Speakers, Tweeters, Amplifier & Grill

Description

• Amplifier Type: Stereo Full – Range
• Amp Minimum Impedance: 2 Ohm/CH (4 Ohm Bridge)
• Pair of 8″ Speaker Grill Covers

DS18 Jeep JK/JKU Loaded Sound Bar Combo w/ Speakers, Tweeters, Amplifier & Grill

This Listing Includes:

• (1) Sound bar JK-SBAR-Black
• (1) DS18 EXL-P800X4 4 Channel Full Range Korean Amplifier
• (2) 8″ Inch Plastic Cover Black 2 PRO-GRILL8 RED
• (4) DS18 8″ Midrange Loudspeaker PRO-GM8
• (4) PRO-TW320 1.5″ Super Bullet Tweeter
• (2) 1″ 240 Watt 8 Ohm Twist-On Compression Driver PRO-DR1P
• (1) 4 AWG AMP KIT 4

DS18 4 Channel Korean Amplifier Class A/B Full Range w/ Bass Knob EXL-P800X4:

• RMS Power @ 4 Ohm: 150W x 4CH
• RMS Power @ 2 Ohm: 200W x 4CH
• RMS Power @ 4 Ohm Bridge : 400W x 2CH
• Frequency Response: 20Hz-20KHz
• Signal/Noise Ratio: Greater than 98dB
• Efficiency @4 Ohm: Greater than 63%
• Damping Factor: 140
• THD%: Greater than 0.10%
• Low Level Input Range: 200MV-6V
• Selectable X-Over: Yes, HPF/FULL/LPF
• X-Over Filter Range: 50Hz-2KHz
• Bass Boost Range: 0-+9dB
• Bass Boost Frequency: 30Hz-60Hz
• Infrasonic Filter: No
• Phase Selector: 0-180
• Class: AB (Analog)
• Amplifier Type: Stereo Full – Range
• Channels: 4 CH
• Minimum Impedance: 2 Ohm/CH (4 Ohm Bridge)
• Led Indicator: PWR / CLIP / PROTECT
• Power Input Size: 4 AWG
• Fuse Rating: 120A
• Remote Level Control: Yes – Dash Mount
• Cooling Fan: Yes
• Thermal Protection: Yes > 97C / 206F
• Over-Load Protection: Yes
• Dc Output Protection: Yes
• Short Circuit Output Protection: Yes
• Voltage Input Protection: Yes, greater than 15.5V
• Clipping Protection: Yes
• Body Color/Finish: Black Aluminum
• Length: 11.5 inches
• Width: 8.77 inches
• Height: 2.67 inches
• Heatsink Length: 9.84 inches

PRO-GRILL8 RED:

• Universal fit and easy installation
• Pair of 8″ Speaker Grill Covers
• Material: PC/ABS
• RMS Power : 120 Watts

PRO-GM8:

• Type Midrange Loudspeaker
• Size: 8″
• RMS Power: 190W
• MAX Power: 580W
• Frequency Response: 90-10KHz
• Impedance: 8 ohm
• Sensitivity 93dB
• Surround Cloth Surround
• Frame: Black Stamp Steel Basket
• Cone: Black Paper Woofer Cone
• Magnet: Ferrite
• Voice Coil Wire: Kapton

Dimension:

• Voice coil size: 1.5″
• Magnet Size: 30 oz
• Mounting Depth: 3.38″ (86mm)
• Cut-Out Dimension: 7.16″ (182mm)

PRO-TW320:

• Type: Super Bullet Tweeter
• RMS Power: 250 Watts
• MAX Power: 500 Watts
• Diaphragm Material: Aluminum
• Sensitivity: 107dB
• Impedance: 4 Ohms
• Frequency Response: 1.6K – 20KHz
• Cutout Diameter: 3.54″
• Mounting Depth 2.26″
• Replacement Diaphragm: PRO-TW320VC

PRO-DR1P:

• Throat Diameter: 1″
• Installation Type: Screw Down
• Nominal Impedance: 8 ohms
• Peak Power Handling: 240W
• Program Power Handling: 120W
• AES Power: 60 W
• Sensitivity (1w/1m): 103dB
• Frequency Response: 800Hz-20Khz
• Recommended HI Pas Crossover : 900Hz
• Voice Coil Diameter: 1″
• Voice Coil Former Material: Kapton
• Winding Material: CCA
• Diaphragm Material: Phenolic
• Magnet Material: Ferrite
• Magnet Weight: 11oz

AMPKIT4:

• Mini-ANL Fuse Holder with Mini-ANL 120A
• Rubber Grommet
• 6 ft. 4GA Loom Tube
• 3 ft. Black Ground Cable: 21mm OD: 10mm
• 17 ft. Red Power Cable: 21mm OD: 10mm
• 17 ft. Red/Black Twisted RCA Cable
• 17 ft. Turn-On Remote Cable 20 x 0.15mm
• 17 ft. Red/Black Speaker Cable 1.31mm x 2C OD 3.2 x 6.4mm