Description
- Nominal Impedance: 8 Ohm
- Recommended Hi Pass Crossover: 100Hz
- Free Air Resonance: Fs – 100Hz
- Signal to Noise Ratio: Greater than 90dB
- Bass EQ: 0-6 dB/12dB @ 45 Hz
Massive Car Audio 8″ Loud Speakers 1200W 8 Ohm With 4 Ch 2 Ohm Amplifier
This Listing Includes:
- (4) Massive Audio 8″ Loud Speakers MA-M8
- (1) Massive Audio 4 Channel Amplifier MA-BP1000.4
Massive Audio’s proven Professional High-Grade Efficiency, High Power Mid-Range Speaker designs are a result of years of experience, research and dedication to high end professional audio products.
The BLADE BP Series Amplifiers are designed with our “Live, Loud and Play Hard” motto. All amplifiers have built-in OEM line converters with RCA inputs that can take a high-level speaker signal at up to 9 Volts directly in.
SPEAKER SPECIFICATIONS:
- Nominal Basket Diameter: 8″ (210mm)
- Nominal Impedance: 8 Ohm
- RMS Watts: 150W
- Peak Watts: 300W
- Recommended Hi Pass Crossover: 100Hz
- Frequency Response: 100Hz-7KHz
- Sensitivity 2.00v at 1m: 96dB
- Voice Coil Diameter: 1.5″ (38mm)
- Voice Coil Wire: CCAW
- Former Material: Til
- Frame Material: Stamped Steel
THIELE-SMALL PARAMETERS:
- Equivalent Volume: Vas – 11.2L
- Excursion: Xmax – 0.75mm
- Free Air Resonance: Fs – 100Hz
- Mechanical Mass: Qms – 1.48
- Total Factor: Qts – 0.441
- Cone Area: Sd – 0.02 m2
- Mechanical Mass: Mms – 0.0122 kg
- BI Factor: BI – 8.1 Tm
- DC Resistance: Re – 5.2 Ohms
- Inductance: Le – 0.18 Mh at 1 KHz
- Mechanical Compliance: Cms – 1.87 mm/N
SPEAKER DIMENSIONS:
- Overall Diameter: 8″ (210mm)
- Baffle Hole Diameter: 7.24″ (184mm)
- Mounting Holes Diameter: 0.20″ x 0.33″ (5.2 x 8.6mm)
- Mounting Holes: B.C.D. 7.8″ (198mm)
- Depth: 3.62″ (92mm)
AMPLIFIER SPECIFICATIONS:
- Channels: 4
- Peak Output Power @ 14.4V: 250W x 4
- RMS @ 4 Ohms: 80W x 4
- RMS @ 2 Ohms: 160W x 4
- RMS Bridged @ 4 Ohms: 320W x 2
- Frequency Response: 10Hz – 35KHz
- Input Sensitivity: 0.2 ~ 9.0V
- Signal to Noise Ratio: Greater than 90dB
- THD & Noise: Less than 0.05%
- Low Pass Cross Frequency: 80Hz – 3KHz
- High Pass Cross Frequency: Full – 3KHz
- Bass EQ: 0-6 dB/12dB @ 45 Hz
- Minimum Impedance: 2 Ohm Stereo
- Fuse Size: 30A x 2
AMPLIFIER DIMENSIONS (LxWxH):
- MM: 320 x 180 x 51
- Inches: 12.6 x 7.1 x 2
Reviews
There are no reviews yet.